If you’re comparing LaseMD Ultra™ and Moxi, you’re already asking the right question. Both devices use the same 1927nm thulium fiber wavelength for non-ablative fractional laser resurfacing — but that’s where the similarities end. LaseMD Ultra delivers broader treatment versatility, deeper customization, and exclusive combination protocols like KeraLase™ and TotalSkin Solution™ that Moxi simply cannot match.
At New Beauty Company Aesthetics in St. Johns, FL, we chose LaseMD Ultra because it gives our patients more treatment options in a single device — from gentle skin refreshing to meaningful corrective results.
Book Your LaseMD Ultra Consultation
Lutronic® device · All skin types · Minimal downtime · St. Johns, FL
LaseMD Ultra vs. Moxi: Side-by-Side Comparison
| Feature | LaseMD Ultra | Moxi |
|---|---|---|
| Wavelength | 1927nm thulium fiber | 1927nm thulium fiber |
| Energy/Intensity Range | Broader — gentle refresh through corrective treatment | Narrower — tuned primarily for lighter treatments |
| Skin Types Treated | All Fitzpatrick skin types (I–VI) | Generally Fitzpatrick I–I |
| Treatment Areas | Face, neck, décolletage, hands, scalp | Face, neck, décolletage, hands |
| KeraLase Hair Restoration | Yes — exclusive protocol | Not available |
| TotalSkin Solution | Yes — combined with Genius® RF Microneedling | Not available |
| Topical Growth Factor Delivery | Optimized for KeraFactorMD® serum absorption | No paired delivery system |
| Downtime | Minimal (mild redness, 5–7 days) | Minimal |
| Best For | Full-spectrum: prejuvenation through correction | Light cosmetic refresh / prejuvenation only |
What Is LaseMD Ultra?
LaseMD Ultra is a non-ablative fractional laser resurfacing system manufactured by Lutronic®. It uses a 1927nm thulium fiber laser to create precise micro-treatment zones in the skin, stimulating the body’s natural healing response and promoting collagen remodeling from within.
LaseMD Ultra treats a wide range of skin concerns, including:
- Actinic keratosis (pre-cancerous sun spots)
- Pigmented lesions and freckles
- Sun damage and photodamage
- Uneven skin tone and texture
- Dullness and rough skin
- Fine lines and early signs of aging
Because Ultra operates across a broad energy spectrum, your provider can calibrate each session to your exact skin type, concern severity, and treatment goals — making it effective for both early-stage maintenance and more advanced corrective work.
Ready to rejuvenate for less? Our monthly specials feature exclusive offers on your favorite med spa treatments, from advanced skincare to body sculpting. Discover your perfect glow at an unbeatable price!
What Is Moxi? (And Where It Falls Short)
Moxi is a non-ablative fractional laser manufactured by Sciton, Inc. Like LaseMD Ultra, Moxi uses a 1927nm thulium fiber laser to resurface the skin with minimal downtime. It is often positioned as an entry-level “prejuvenation” laser — a lighter treatment designed for younger patients or those with early-stage skin concerns who want to maintain healthy skin before damage accumulates.
That positioning is also Moxi’s limitation. Moxi is generally tuned for gentler, less intensive treatments. For patients with established sun damage, deeper hyperpigmentation, or more advanced texture concerns, Moxi’s narrower treatment range may not deliver the correction they need. This is precisely where LaseMD Ultra’s broader energy range and exclusive combination protocols become the deciding factor for most patients choosing between the two devices.
Why Ultra Is Better Than Moxi
1. Broader Energy and Intensity Range
LaseMD Ultra adapts from gentle prejuvenation all the way up to more aggressive corrective treatment — in the same device. Moxi’s energy range is narrower, which limits how much correction it can achieve in a single session. Ultra is better than Moxi for patients who want a device that scales with their needs over time.
2. Ultra Treats More Skin Concerns Than Moxi
LaseMD Ultra is used for actinic keratosis, deeper sun damage, hyperpigmentation, texture irregularities, and tone correction — conditions that go well beyond light cosmetic refreshing. Moxi is most often positioned for lighter treatments and surface-level concerns. When it comes to treating real skin damage, Ultra is better than Moxi because it addresses a wider spectrum of conditions in one platform.
3. Ultra Works on All Fitzpatrick Skin Types
LaseMD Ultra is safe and effective across all Fitzpatrick skin types (I–VI), including darker skin tones that carry a higher risk of post-inflammatory hyperpigmentation with other laser devices. Moxi’s treatment parameters are generally optimized for lighter skin types. For patients with medium to dark skin tones, Ultra is the better choice over Moxi.
4. Exclusive Combination Protocols Moxi Cannot Offer
LaseMD Ultra pairs with two exclusive treatment protocols that have no Moxi equivalent:
- KeraLase™ Hair Restoration: Ultra creates micro-channels in the scalp, then KeraFactorMD® growth factor serum is applied for enhanced absorption — a combined approach to non-surgical hair restoration that Moxi does not support.
- TotalSkin Solution™: Ultra is paired with Genius® RF Microneedling to address both surface-level pigmentation and deeper collagen remodeling in a single treatment plan. Moxi has no equivalent paired protocol.
5. Optimized Topical Compound Delivery
The micro-channels LaseMD Ultra creates are specifically designed to enhance absorption of KeraFactorMD® serums and other topical compounds. This delivery mechanism allows active ingredients to penetrate deeper and more evenly than topical application alone. Moxi does not pair with a comparable serum delivery system, making Ultra the better option for patients who want enhanced product absorption as part of their treatment.
6. More Treatment Areas Than Moxi
LaseMD Ultra treats the face, neck, décolletage, hands, and scalp (via KeraLase). The scalp treatment capability is entirely exclusive to Ultra — Moxi does not offer a hair restoration protocol. For patients looking to address skin and hair concerns with a single laser platform, Ultra is better than Moxi.
7. Results, Not Just Maintenance
Moxi is designed primarily as a maintenance and prejuvenation laser — ideal for patients who want to preserve good skin rather than correct existing damage. LaseMD Ultra does both. It handles light maintenance treatments and delivers meaningful corrective results for patients with real concerns. If you want a laser that grows with you — from your first refresh to your most advanced correction — Ultra is the better choice over Moxi.
Who Should Choose Ultra Over Moxi?
If you’re deciding between LaseMD Ultra and Moxi, here’s how to think about it:
- Established sun damage, actinic keratosis, or hyperpigmentation → Choose Ultra. Moxi’s lighter treatment range may not deliver enough correction.
- Deeper texture or tone concerns → Choose Ultra. Its broader energy settings address more than surface-level irregularities.
- Hair restoration alongside skin resurfacing → Choose Ultra. KeraLase is an Ultra-exclusive protocol — Moxi cannot do this.
- A single device that scales from light refresh to corrective treatment → Choose Ultra. One platform, full range.
- Younger skin with no real damage, just wanting a light glow → Either device works, but Ultra still gives you room to grow into more advanced treatments as your skin needs evolve.
KeraLase™ Hair Restoration
KeraLase is an Ultra-exclusive protocol that combines LaseMD Ultra’s fractional laser with KeraFactorMD® growth factor serum for non-surgical hair restoration. Ultra creates thousands of micro-channels in the scalp, and KeraFactorMD — a proprietary blend of growth factors, proteins, and skin-optimizing nutrients — is applied immediately after for enhanced absorption into the hair follicle environment.
This combination approach supports thicker, healthier-looking hair growth without surgery, injections, or extended downtime. KeraLase is available only with LaseMD Ultra — it is not a protocol Moxi can replicate.
TotalSkin Solution™
TotalSkin Solution combines LaseMD Ultra with Genius® RF Microneedling in a single treatment plan that addresses skin concerns at every level. Ultra resurfaces and corrects pigmentation, sun damage, and tone at the surface, while Genius RF delivers radiofrequency energy deep into the dermis to remodel collagen and tighten skin from within.
Together, these two technologies treat what neither can fully address alone — giving you comprehensive skin rejuvenation in one coordinated protocol. TotalSkin Solution is exclusive to LaseMD Ultra and has no Moxi equivalent.
What to Expect: Treatment, Comfort, and Downtime
LaseMD Ultra treatments are fast, comfortable, and require minimal downtime. Here’s what a typical session looks like:
Before treatment: A topical numbing cream is applied to ensure your comfort throughout the procedure.
During treatment: Your provider passes the LaseMD Ultra handpiece across the treatment area. A full-face session takes approximately 6–8 minutes. Depending on the areas treated and intensity selected, total treatment time ranges from 5 to 20 minutes. Most patients describe the sensation as a warm, tingling feeling.
After treatment: You may experience mild redness similar to a light sunburn. This typically resolves within 5–7 days. During healing, the skin may feel slightly rough or sandy as micro-treated zones exfoliate naturally. There is no significant peeling or open wounding — you can return to most normal activities the same day.
Number of treatments: Most patients see optimal results with a series of 3–5 treatments spaced several weeks apart, though many notice visible improvement after a single session. Your provider will recommend a treatment plan based on your specific concerns and goals.
Frequently Asked Questions
Is LaseMD Ultra better than Moxi?
For most patients, yes. LaseMD Ultra offers a broader energy range, treats more skin concerns, works on all skin types, and includes exclusive combination protocols (KeraLase and TotalSkin Solution) that Moxi does not support. Moxi is a capable prejuvenation laser, but Ultra covers everything Moxi does and goes further.
What’s the difference between LaseMD Ultra and Moxi?
Both use the same 1927nm thulium fiber wavelength, but LaseMD Ultra has a wider treatment range — from light maintenance to corrective resurfacing. Ultra also offers exclusive protocols like KeraLase hair restoration and TotalSkin Solution (combined with Genius RF Microneedling) that are not available with Moxi.
Can I get KeraLase or TotalSkin Solution with Moxi?
No. KeraLase and TotalSkin Solution are exclusive to LaseMD Ultra. Moxi does not pair with KeraFactorMD growth factor delivery or Genius RF Microneedling in an equivalent protocol.
Which laser is better for hyperpigmentation, Ultra or Moxi?
LaseMD Ultra. Its broader energy range allows providers to treat deeper and more stubborn hyperpigmentation than Moxi’s lighter settings typically address. Ultra is also safe across all Fitzpatrick skin types, which is important for patients with darker skin tones who are prone to post-inflammatory hyperpigmentation.
Is Moxi or Ultra better for darker skin tones?
LaseMD Ultra is the better choice. It is rated for all Fitzpatrick skin types (I–VI), while Moxi is generally optimized for lighter skin types. For patients with medium to dark skin, Ultra provides safer, more calibrated treatment options.
Is the downtime different between Ultra and Moxi?
Downtime is comparable — both involve minimal recovery with mild redness lasting several days. LaseMD Ultra’s downtime ranges from 5–7 days of mild redness and subtle texture changes, depending on treatment intensity.
How does LaseMD Ultra work?
LaseMD Ultra uses a 1927nm thulium fiber laser to create thousands of tiny micro-treatment zones in the skin. This controlled micro-injury stimulates the body’s natural healing and collagen remodeling process, resulting in smoother, more even, and more vibrant skin over the following weeks.
Is the treatment uncomfortable?
Most patients tolerate LaseMD Ultra very well. A topical numbing cream is applied before treatment, and the procedure itself is described as a warm, tingling sensation. Discomfort is minimal.
How long does a treatment take?
A full-face LaseMD Ultra session takes approximately 6–8 minutes. Including preparation and numbing, expect your appointment to last 30–45 minutes total.
How many treatments will I need?
Most patients achieve optimal results with 3–5 treatments spaced several weeks apart, though visible improvement is often noticeable after the first session. Your provider will design a treatment plan based on your skin type, concerns, and goals.
How do I get started?
Book a consultation at New Beauty Company Aesthetics or call us at 904-441-8460. During your consultation, we’ll evaluate your skin, discuss your goals, and recommend a personalized LaseMD Ultra treatment plan.
LaseMD Ultra in St. Johns, FL — Serving Northeast Florida
New Beauty Company Aesthetics is proud to offer LaseMD Ultra laser resurfacing to patients throughout Northeast Florida. Our practice is located at 175 Rainier Ln, Suite 9, St Johns, FL 32259 and serves patients from Jacksonville, Ponte Vedra, Ponte Vedra Beach, St. Augustine, and Jacksonville Beach.
If you’ve been comparing LaseMD Ultra and Moxi and want to see why Ultra is the better choice, we’d love to help you make the right decision for your skin.
Results may vary. LaseMD Ultra treatments should be performed by a qualified provider. Individual results depend on skin type, condition severity, and treatment adherence. Please consult with our team to determine if LaseMD Ultra is right for you.
From weight loss to skin rejuvenation, experience tailored treatments that empower you to embrace a fresher, more confident version of yourself.
